SHIFT LEVER REMOVAL


  1. REMOVE CONSOLE BOX ASSEMBLY


    1. Remove the console box Click here.

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A006SMAE01

      Disconnect the end of the transmission control cable from the shift lever assembly.

    3. A006SWGE01
      Text in Illustration
      *1 Stopper
      *2 Nut

      Using a screwdriver, pull out the stopper of the transmission control cable.

      Note

      Do not remove the stopper. If the stopper is removed, reinstall it to its original position.

    4. Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable will not be reusable.

  3. REMOVE SHIFT LEVER ASSEMBLY

    A006X1BE01

    1. Disconnect the 2 connectors and 4 clamps from the shift lever.

    2. Remove the 4 bolts and shift lever.