MANUAL TRANSAXLE OIL REPLACEMENT


  1. REMOVE ENGINE UNDER COVER


    1. A010JNA

      Remove the 8 clips and fold back the engine under cover.

      Tech Tips

      It is not necessary to fully remove the engine under cover. Partially remove it so that the oil can be replaced in a later step.

  2. REMOVE REAR ENGINE UNDER COVER LH


    1. Remove the 5 clips and under cover.

  3. DRAIN MANUAL TRANSAXLE OIL


    1. A010KSSE02
      Text in Illustration
      *1 Filler Plug

      Remove the filler plug and gasket.

    2. Remove the drain plug and gasket to drain the manual transaxle oil.

      Text in Illustration
      *2 Drain Plug

    3. Install a new gasket and the drain plug.

      Torque:
      45 N*m  { 459 kgf*cm, 33 ft.*lbf }

  4. ADD MANUAL TRANSAXLE OIL


    1. A010I5YE41

      Add oil until the oil level is within 5 mm (0.197 in.) from the bottom of the transmission filler plug opening.

      Manual Transaxle Gear Oil
      TOYOTA Genuine Manual Transmission Gear Oil LV or equivalent
      Oil Classification
      API GL-4 and SAE 75W
      Capacity
      2.4 liters (2.5 US qts, 2.1 IMP. qts)

    2. Install a new gasket and the transmission filler plug.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note


      • When adding transaxle oil, make sure the vehicle is level.

      • An excessively large or small amount of oil may cause problems.

  5. INSPECT FOR OIL LEAK

  6. INSTALL REAR ENGINE UNDER COVER LH


    1. Install the under cover LH with the 5 clips.

  7. INSTALL ENGINE UNDER COVER


    1. A010GSO

      Install the engine under cover with the 8 clips.