MANUAL TRANSAXLE UNIT INSPECTION


  1. INSPECT REVERSE IDLER GEAR SUB-ASSEMBLY


    1. A0052DB

      Using a caliper gauge, measure the inside diameter of the reverse idler gear.

      Standard inside diameter
      20.056 to 20.074 mm (0.7896 to 0.7903 in.)
      Maximum inside diameter
      20.074 mm (0.7903 in.)

      If the inside diameter is more than the maximum, replace the reverse idler gear sub-assembly.

    2. Using a micrometer, measure the outer diameter of the reverse idler gear shaft.

      Standard outer diameter
      19.984 to 20.000 mm (0.7867 to 0.7874 in.)
      Minimum outer diameter
      19.984 mm (0.7867 in.)

      If the outer diameter is less than the minimum, replace the reverse idler gear shaft.