BACK-UP LIGHT SWITCH INSTALLATION


  1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY


    1. A00DQ38E01

      Using SST, install a new gasket and the back-up light switch to the transaxle case.

      SST
      09817-16011
      Torque:
      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

    2. Connect the back-up light switch connector.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    1. A00DQ1D

      Install the air cleaner case with the 3 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Attach the wire harness clamp to the air cleaner case.

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A005SIR

      Connect the air cleaner cap with the band.

    2. Connect the ventilation hose.

    3. A005UHW

      Connect the 2 clamps.

    4. A005SHE

      Attach the wire harness to the 2 clamps.

    5. Connect the mass air flow meter connector.

  4. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A005W8Q

      Attach the 4 clips to install the cover.

      Note


      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.