TRANSMISSION CONTROL CABLE REMOVAL


  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  2. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A010LI3

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A010LIZ

      Disconnect the mass air flow meter connector.

    2. Detach the wire harness from the 2 clamps.

    3. A010LJ4

      Disconnect the 2 clamps.

    4. A010IQW

      Disconnect the ventilation hose.

    5. Loosen the band and remove the air cleaner cap.

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    1. A010IG6

      Detach the wire harness clamp from the air cleaner case.

    2. Remove the 3 bolts and air cleaner case.

  5. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  6. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

    A010JPR

    1. Remove the 3 nuts and front No. 1 floor heat insulator.

  7. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A010HU3

      Remove the 2 clips and disconnect the 2 cables from the transaxle.

    2. A010G0E

      Remove the 2 clips and disconnect the 2 cables from the control cable bracket.

    3. A010KH9

      Remove the bolt and detach the bracket of the control cable assembly.

    4. A010M59

      Remove the 2 nuts and detach the grommet of the control cable assembly.

    5. A010LY1

      Remove the clip and disconnect the end of the select control cable.

    6. A010IDQ

      Remove the clip and disconnect the end of the shift control cable.

    7. A010M8Q

      Detach the claws and remove the control cable assembly.