DIFFERENTIAL CASE INSPECTION


  1. INSPECT FRONT DIFFERENTIAL SIDE GEAR BACKLASH

    A00DV3SE01

    1. Using a dial indicator, measure the backlash of the side gear.

      Standard backlash
      0.05 to 0.20 mm (0.00197 to 0.00787 in.)

      If the backlash is not as specified, replace the thrust washer with one of a different thickness so that the backlash is within the specified range.

      Thrust Washer Thickness
      Thickness Thickness
      1.0 mm (0.0394 in.) 1.2 mm (0.0472 in.)
      1.1 mm (0.0433 in.) 1.3 mm (0.0512 in.)