AUTOMATIC TRANSAXLE ASSEMBLY (for 1AZ-FE) REMOVAL


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE


    1. Remove the engine with transaxle Click here.

  2. REMOVE STARTER ASSEMBLY


    1. A005RRH

      Disconnect the starter connector.

    2. Open the terminal cap, remove the nut and disconnect the starter wire.

    3. A005VY7

      Remove the 2 bolts and starter.

  3. DISCONNECT WIRE HARNESS

    A005STY

    1. Disconnect the park/neutral position switch connector.

    2. Disconnect the transaxle wire connector.

    3. Disconnect the 2 speed sensor connectors.

    4. Detach the 3 wire harness clamps.

  4. REMOVE GROUND CABLE


    1. Remove the bolt, detach the clamp and remove the ground cable.

  5. REMOVE FRONT ENGINE MOUNTING BRACKET

    A005UN2

    1. Remove the 3 bolts and mounting bracket.

  6. REMOVE REAR ENGINE MOUNTING BRACKET

    A005WL2

    1. Remove the 3 bolts and mounting bracket.

  7. REMOVE ENGINE MOUNTING BRACKET LH

    A005WIY

    1. Remove the 3 bolts and mounting bracket.

  8. REMOVE OIL COOLER TUBE SUB-ASSEMBLY

    A005ROH

    1. Disconnect the 2 oil cooler hoses.

    2. Remove the bolt and oil cooler tube.

  9. REMOVE DRIVE PLATE AND TORQUE CONVERTER SETTING BOLT

    A005WFQE01

    1. Remove the flywheel housing under cover.

    2. Turn the crankshaft to gain access to the 6 bolts and remove each bolt while holding the crankshaft pulley bolt with a wrench.

  10. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    A005UQE

    1. Remove the 5 bolts.

    2. A005RBE

      Remove the 4 lower side mounting bolts.

    3. Remove the automatic transaxle.

  11. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY

    A005T2R

    1. Remove the ATF dipstick.

    2. Remove the bolt and oil filler tube.

    3. Remove the O-ring from the transmission oil filler tube.

  12. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET

    A005UZU

    1. Remove the 2 bolts and cable bracket.

  13. REMOVE SPEEDOMETER DRIVEN HOLE COVER SUB-ASSEMBLY

    A005TT1

    1. Remove the bolt and hole cover from the transaxle case.

    2. Remove the O-ring from the hole cover.

  14. REMOVE WIRE HARNESS CLAMP BRACKET

    A005V5H

    1. Remove the bolt and wire harness clamp bracket.

  15. REMOVE TRANSMISSION CONTROL CABLE SUPPORT

    A005UBR

    1. Remove the bolt and transmission control cable support.

  16. REMOVE TORQUE CONVERTER ASSEMBLY