TRANSMISSION WIRE INSTALLATION


  1. INSTALL TRANSMISSION WIRE

    A00OK37E02

    1. Coat a new O-ring with ATF WS and install it to the transmission wire connector.

    2. A00OMZ3

      Install the transmission wire with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the transmission wire connector.

  2. CONNECT TRANSMISSION WIRE

    A00OIAYE08
    Text in Illustration
    *1 Lock Plate

    1. Coat the O-ring of the ATF temperature sensor with ATF WS.

    2. Install the ATF temperature sensor with the lock plate and bolt.

      Torque:
      6.6 N*m  { 67 kgf*cm, 58 in.*lbf }

    3. Connect the 5 shift solenoid valve connectors.

  3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

    A00OI6BE06

    1. Install the 2 magnets to the oil pan.

      Text in Illustration
      *1 Magnet
    2. A00OM4VE01

      Install a new gasket and the oil pan with the 18 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

  4. INSTALL NO. 1 ENGINE UNDER COVER


    1. A00ON3U

      Install the under cover with the 10 clips.

  5. INSTALL FRONT LOWER BUMPER ABSORBER

    A00OI9A

    1. Install the front lower bumper absorber with the 8 bolts and 3 screws.

    2. A00OL3A

      Install the 2 screws and 4 bolts.

  6. INSTALL BATTERY CARRIER

    A00OJKB

    1. Install the battery carrier with the 4 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

    2. Attach the 2 wire harness clamps.

  7. INSTALL BATTERY


    1. Install the battery tray.

    2. Install the battery.

    3. Install the battery clamp with the bolt and tighten the nut.

      Torque:
      for bolt
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
      for nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    4. Connect the cable to the positive (+) battery terminal.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. ADD AUTOMATIC TRANSAXLE FLUID

    Fluid type
    Toyota Genuine ATF WS

  10. INSPECT TRANSAXLE FLUID LEVEL

    Click here

  11. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A00OKW2

      Install the radiator support opening cover with the 7 clips.