IGNITION SWITCH INSTALLATION


  1. INSTALL IGNITION SWITCH ASSEMBLY


    1. Install the ignition switch with the 2 screws.

    2. Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.

  2. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY


    1. Secure the steering column assembly in a vise.

    2. Temporarily install the steering column upper with switch bracket assembly to the steering column assembly with a new tapered-head bolt.

      Note

      Be sure to use a new tapered-head bolt.

    3. A003DB2

      Tighten the tapered-head bolt until the bolt heads breaks off.

  3. INSTALL STEERING COLUMN ASSEMBLY


    1. for Power Tilt and Power Telescopic Steering Column:

      Install the steering column assembly Click here.

    2. for Manual Tilt and Manual Telescopic Steering Column:

      Install the steering column assembly Click here.