ENGINE SWITCH REMOVAL


  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. Remove the lower No. 1 instrument panel airbag Click here.

  2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00OLPBE01
      Text in Illustration
      *1 Protective Tape
      *2 Clamp
      *3 Guide

      Place protective tape as shown in the illustration.

    2. Using a moulding remover B, detach the 2 clips and 5 claws.

    3. Detach the clamp.

    4. Detach the guide near the front of the vehicle and remove the finish panel.

  3. REMOVE NO. 3 BOX PANEL


    1. Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 clips and remove the box panel.

      A005V11E01
      Text in Illustration
      *1 Protective Tape

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. Using a moulding remover B, detach the 4 clips and 5 claws and remove the panel end.

      A00OME5E01

  5. REMOVE ELECTRIC PARKING BRAKE SWITCH ASSEMBLY


    1. Disconnect the connector.

    2. A005VXNE01

      Remove the 3 bolts and electric parking brake switch.

  6. REMOVE ENGINE SWITCH


    1. Disconnect the connector.

    2. A00OKUX

      Detach the 2 claws and remove the engine switch.