STARTER INSTALLATION


  1. INSTALL FLYWHEEL HOUSING SIDE COVER


    1. Install the flywheel housing side cover to the cylinder block.

  2. INSTALL STARTER ASSEMBLY


    1. Install the starter with the 2 bolts.

      Torque:
      37 N*m  { 380 kgf*cm, 27 ft.*lbf }

    2. Connect the connector.

    3. Connect the starter wire with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    4. Connect the terminal cap.

  3. INSTALL BATTERY CARRIER


    1. A00OKIS

      Install the battery carrier with the 4 bolts.

      Torque:
      19 N*m  { 189 kgf*cm, 14 ft.*lbf }
    2. A00OHVH

      Install the radiator pipe with the 2 bolts.

      Torque:
      19 N*m  { 189 kgf*cm, 14 ft.*lbf }

    3. Connect the 2 wire harness clamps.

  4. INSTALL BATTERY TRAY

  5. INSTALL BATTERY

  6. INSTALL BATTERY CLAMP SUB-ASSEMBLY


    1. A00OLE3E01

      Install the battery clamp with the bolt and nut.

      Torque:
      for bolt
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
      for nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    2. Connect the cable to the positive (+) battery terminal.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A00ONJ8

      Connect the air cleaner cap with the band.

    2. Connect the ventilation hose.

    3. A00OMTD

      Connect the 2 clamps.

    4. A00OO0U

      Attach the wire harness to the 2 clamps.

    5. Connect the mass air flow meter connector.

  8. INSTALL NO. 1 ENGINE UNDER COVER (for Rough Road Area Specification Vehicles)


    1. A00OL2M

      Install the under cover with the 3 clips.

  9. INSTALL NO. 1 ENGINE UNDER COVER


    1. A00ON3U

      Install the under cover with the 10 clips.

  10. INSTALL FRONT LOWER BUMPER ABSORBER


    1. A00OI9A

      Install the front lower bumper absorber with the 3 screws and 8 bolts.

    2. A00OL3A

      Install the 4 screws and 2 bolts.

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A00OKW2

      Install the radiator support opening cover with the 7 clips.

  13. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A00OMDB

      Attach the 4 clips to install the cover.

      Note


      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.