IGNITION SWITCH INSTALLATION


  1. INSTALL IGNITION SWITCH ASSEMBLY


    1. A003CGY

      Install the ignition switch with the 2 screws.

  2. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY


    1. Secure the steering column assembly in a vise.

    2. Temporarily install the steering column upper with switch bracket assembly to the steering column assembly with a new tapered-head bolt.

      Note

      Be sure to use a new tapered-head bolt.

    3. A003DB2

      Tighten the tapered-head bolt until the bolt heads breaks off.

  3. INSTALL STEERING COLUMN ASSEMBLY


    1. for Power Tilt and Power Telescopic Steering Column:

      Install the steering column assembly Click here.

    2. for Manual Tilt and Manual Telescopic Steering Column:

      Install the steering column assembly Click here.