WATER PUMP REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A005RE1

      Remove the clip and engine room side cover.

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A005SU5

      Remove the 8 clips and radiator support opening cover.

  3. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A00DSJD

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  4. REMOVE REAR ENGINE UNDER COVER RH


    1. A005V2G

      Remove the 5 clips and under cover RH.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. DRAIN ENGINE COOLANT


    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the reserve tank cap.

      CAUTION:

      Do not remove the reserve tank cap while the engine and radiator are still hot.

      Pressurized, hot engine coolant and steam may be released and cause serious burns.

      A00DSEWE01
      Text in Illustration
      *1 Reserve Tank Cap *2 Radiator Drain Cock Plug

  7. REMOVE V-RIBBED BELT


    1. A005T5NE01

      Loosen bolts A and B.

    2. Loosen bolt C and remove the V-ribbed belt.

      Note

      Do not loosen bolt D.

  8. REMOVE GENERATOR ASSEMBLY


    1. A005SIG

      Remove the terminal cap.

    2. Remove the nut and disconnect the wire harness from terminal B.

    3. Disconnect the connector and wire harness clamp.

    4. A005UGX

      Loosen the 3 bolts.

    5. A005SPL

      Remove the 2 bolts and adjusting bar.

    6. A005RGN

      Remove the bolt and generator.

    7. A005TRR

      Remove the bolt and wire harness clamp bracket.

  9. REMOVE WATER PUMP ASSEMBLY


    1. A00DS9X

      Remove the 5 bolts and water pump from the timing chain cover.

    2. A00DRNVE01

      Remove the gasket from the timing chain cover.