EXHAUST PIPE REMOVAL


  1. REMOVE TAILPIPE ASSEMBLY


    1. A00DTVW

      Remove the 2 bolts and 2 compression springs.

    2. Remove the 4 exhaust pipe supports and tailpipe assembly.

  2. REMOVE FRONT CENTER FLOOR BRACE


    1. A00DQAY

      Remove the 4 bolts and floor brace.

  3. REMOVE NO. 2 ENGINE UNDER COVER


    1. A00DUSP

      Using a clip remover, remove the 4 clips and under cover.

  4. REMOVE HEATED OXYGEN SENSOR


    1. A00DUJ9

      Disconnect the sensor connector.

    2. Detach the clamp.

    3. Remove the wire harness clamp bracket.

    4. A00DTT3E01

      Using SST, remove the sensor from the front exhaust pipe.

      SST
      09224-00010

      Note

      Do not damage the sensor.

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A00DRN8

      Remove the 2 bolts and 2 compression springs.

    2. Remove the 2 exhaust pipe supports and front exhaust pipe assembly.