COOLING FAN MOTOR ON-VEHICLE INSPECTION


  1. INSPECT NO. 1 COOLING FAN MOTOR


    1. A005U57E01
      Text in Illustration
      *1

      Component without harness connected

      (Cooling Fan Motor)

      Disconnect the connector.

    2. Connect the 400 A probe of an ammeter to positive wire harness side of the cooling fan motor.

    3. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

    4. Measure the current while the motor is turning.

      Standard Current
      Tester Connection Condition Specified Condition
      2 (+) - Probe 20°C (68°F) 7.4 to 10.9 A

      If the result is not as specified, replace the cooling fan motor.

  2. INSPECT NO. 2 COOLING FAN MOTOR


    1. A005RR4E01
      Text in Illustration
      *1

      Component without harness connected

      (Cooling Fan Motor)

      Disconnect the connector.

    2. Connect the 400 A probe of an ammeter to positive wire harness side of the cooling fan motor.

    3. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

    4. Measure the current while the motor is turning.

      Standard Current
      Tester Connection Condition Specified Condition
      2 (+) - Probe 20°C (68°F) 5.7 to 7.7 A

      If the result is not as specified, replace the cooling fan motor.