EXHAUST PIPE INSTALLATION


  1. INSTALL FRONT EXHAUST PIPE ASSEMBLY


    1. A00DU2VE03

      Using a vernier caliper, measure the free length of the compression spring.

      Minimum length
      41.5 mm (1.63 in.)

      If the free length is less than the minimum, replace the compression spring.

    2. A00DQ5QE01
      Text in Illustration
      *1 Gasket
      *2 Exhaust Manifold

      Install a new gasket to the exhaust manifold.

      Note


      • Be sure to install the gasket in the correct direction.

      • Do not reuse the gasket.

      • Do not damage the gasket.

    3. Install the straight screw plug.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

    4. Install the front exhaust pipe with the 2 compression springs and 2 bolts.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

  2. INSTALL CENTER EXHAUST PIPE ASSEMBLY


    1. Install a new gasket onto the front exhaust pipe.

    2. Connect the 2 exhaust pipe supports to install the center exhaust pipe.

    3. Install the 2 bolts.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

  3. INSTALL TAILPIPE ASSEMBLY


    1. A00DU2VE03

      Using a vernier caliper, measure the free length of the compression spring.

      Minimum length
      38.5 mm (1.52 in.)

      If the free length is less than the minimum, replace the compression spring.

    2. A00DQ5QE01
      Text in Illustration
      *1 Gasket
      *2 Exhaust Pipe Assembly

      Install a new gasket to the center exhaust pipe assembly.

      Note


      • Be sure to install the gasket in the correct direction.

      • Do not reuse the gasket.

      • Do not damage the gasket.

    3. Connect the 4 exhaust pipe supports to install the tailpipe.

    4. Install the 2 compression springs and 2 bolts.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

  4. INSPECT FOR EXHAUST GAS LEAK

    If gas is leaking, tighten the problem areas to stop the leak. Replace damaged parts as necessary.