PURGE VALVE REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A005W8Q

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  2. REMOVE PURGE VSV


    1. A005SSJ

      Disconnect the purge VSV connector.

    2. Disconnect the 2 fuel vapor feed hoses from the purge VSV.

      Note

      Carefully disconnect the hoses while holding the purge VSV by hand.

    3. A005RSR

      Remove the screw and purge VSV.