FUEL PRESSURE REGULATOR REMOVAL


  1. REMOVE FUEL SUCTION WITH PUMP ASSEMBLY


    1. Remove the fuel suction with pump assembly Click here.

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A005RND

      Disconnect the connector of the fuel sender gauge assembly.

    2. Remove the harness protector from the wire harness.

    3. Disconnect the 2 harness clamps.

      Note

      Do not damage the wire harness.

    4. A005S68E01
      Text in Illustration
      *1 Lock

      Release the lock and slide the fuel sender gauge assembly to remove it.

  3. REMOVE FUEL PUMP

    Note

    Do not separate the tube indicated in the illustration Click here.


    1. A005RWQ

      Disconnect the fuel pump filter hose.

    2. A005WBF

      Using a screwdriver with its tip wrapped in protective tape, detach the 2 claws and remove the fuel filter and fuel pump from the fuel sub-tank.

    3. A005RXM

      Using needle-nose pliers, detach the 2 claws and remove the No. 1 fuel suction support.

    4. A005R7A

      Detach the 5 claws on the filter and remove the fuel pump from the fuel filter.

      Note


      • Do not damage the fuel pump filter.

      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    5. A005SQI

      Disconnect the fuel pump harness connector.

    6. A005W31E01

      Remove the O-ring from the fuel filter.

    7. Remove the fuel pump spacer from the fuel pump assembly.

      Text in Illustration
      *1 O-Ring
      *2 Fuel Pump Spacer

  4. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. A00OIPP

      Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly.

      Note

      Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the regulator and the fuel filter.

    2. A00OJZDE01
      Text in Illustration
      *1 O-Ring

      Remove the 2 O-rings from the pressure regulator assembly.