DOOR CONTROL TRANSMITTER (w/o Entry and Start System) INSTALLATION

Note

Take extra care when handling these precision electronic components.


  1. INSTALL DOOR CONTROL TRANSMITTER MODULE

    Note

    When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


    1. A00OJV9

      Install the door control transmitter module.

  2. INSTALL TRANSMITTER HOUSING COVER


    1. A00OJLV

      Install the transmitter housing cover to the transmitter housing case.

    2. Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.

      OK
      Transmitter LED illuminates 3 times when switch is pressed 3 times.