TRANSMITTER BATTERY (w/o Entry and Start System) INSTALLATION


  1. INSTALL TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. A00OHXD

      Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A00OLQL

      Install the cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  2. INSTALL DOOR CONTROL TRANSMITTER MODULE


    1. A00OJV9

      Install the door control transmitter module.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  3. INSTALL TRANSMITTER HOUSING COVER


    1. A00OJLV

      Install the transmitter housing cover to the transmitter housing case.

    2. Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.

      OK
      Transmitter LED illuminates 3 times when switch is pressed 3 times.