WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System) DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF

      ON: Driver side door open

      OFF: Driver side door closed

      		 -
      P Door Courtesy SW Passenger side door courtesy light switch signal / ON or OFF

      ON: Passenger side door open

      OFF: Passenger side door closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal / ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      Back Door Courtesy SW Luggage compartment door*1 or back door*2 courtesy switch signal / ON or OFF

      ON: Luggage compartment door*1 or back door*2 open

      OFF: Luggage compartment door*1 or back door*2 closed

      		 -
      D-Lock Pos switch Driver side door lock position switch signal / ON or OFF

      ON: Driver side door unlocked

      OFF: Driver side door locked

      		 -
      P-Lock Pos switch Passenger side door lock position switch signal / ON or OFF

      ON: Passenger side door unlocked

      OFF: Passenger side door locked

      		 -
      RL-Lock Pos switch Rear door LH lock position switch signal / ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      RR-Lock Pos switch Rear door RH lock position switch signal / ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      Back Door Open Luggage compartment door*1 or back door*2 lock position switch signal / Permit or Prohibit

      Permit: Luggage compartment door*1 or back door*2 unlocked

      Prohibit: Luggage compartment door*1 or back door*2 locked

      		 -

      *1: for Sedan

      *2: for Wagon

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Hazard Turn signal flasher relay ON or OFF -
      Wireless Buzzer Wireless door lock buzzer ON or OFF -
      Door Lock All door lock motors OFF or LOCK -