POWER MANAGEMENT CONTROL ECU REMOVAL


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)


    1. A00OIM8

      Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A00OKMC

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  2. REMOVE POWER MANAGEMENT CONTROL ECU (for LHD)

    A003BQNE01

    1. Disconnect the 2 connectors.

    2. w/o Entry and Start System:

      Remove the bolt and power management control ECU.

    3. w/ Entry and Start System:

      Remove the 2 bolts and power management control ECU.

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)


    1. Remove the upper instrument panel sub-assembly Click here.

  4. REMOVE POWER MANAGEMENT CONTROL ECU (for RHD)

    A003DUHE01

    1. Disconnect the 2 connectors.

    2. w/o Entry and Start System:

      Remove the bolt and power management control ECU.

    3. w/ Entry and Start System:

      Remove the 2 bolts and power management control ECU.