BATTERY CURRENT SENSOR INSTALLATION


  1. INSTALL BATTERY CURRENT SENSOR ASSEMBLY

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.


    1. A003DQ7E04
      Text in Illustration
      *1 No. 3 Engine Wire

      Install the battery current sensor to the No. 3 engine wire.

    2. Connect the connector to the battery current sensor.

    3. A003B0Q

      Install the No. 3 engine wire and battery current sensor to the negative (-) battery terminal with the nut.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

  2. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A00DRS1

      Install the radiator support opening cover with the 8 clips.

  3. INSTALL ENGINE ROOM SIDE COVER


    1. A00DRIG

      Install the engine room side cover with the clip.