AIR FUEL RATIO SENSOR INSTALLATION


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A00DS02E01

      Using SST, install the sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips

      Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      Note

      Do not damage the sensor.

    2. A00DQ8P

      Connect the sensor connector and clamp.

  2. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A005W8Q

      Attach the 4 clips to install the cover.

      Note


      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.

  3. INSTALL OUTER COWL TOP PANEL

    A010HPX

    1. Install the outer cowl top panel with the 9 bolts.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

  4. INSTALL FRONT WIPER MOTOR AND LINK


    1. Install the front wiper motor and link Click here.