IGNITION COIL AND SPARK PLUG REMOVAL


  1. REMOVE COWL TOP VENTILATOR LOUVER


    1. Remove the cowl top ventilator louver Click here.

  2. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A005W8Q

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  3. REMOVE IGNITION COIL ASSEMBLY


    1. A005T4M

      Disconnect the 4 ignition coil connectors.

    2. A005RTQE01
      Text in Illustration
      *1 Cylinder Head Cover
      *2 Spark Plug Tube
      *3 Plug Cap

      Remove the 4 bolts and 4 ignition coils.

      Note

      When removing the ignition coil, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.

  4. REMOVE SPARK PLUG


    1. A005RUK

      Using a 14 mm spark plug wrench and 100 mm extension bar, remove the 4 spark plugs.