INTEGRATION RELAY INSTALLATION


  1. INSTALL INTEGRATION NO.1 RELAY


    1. Connect the 3 connectors.

    2. A00DRMV

      Attach the 2 claws to install the integration relay to the relay block.

  2. INSTALL RELAY BLOCK


    1. A00DSFU

      Attach the 4 claws to install the wire harness cover.

    2. A00DQEF

      Attach the 10 claws to assemble the upper side and lower side of the relay block cover.

      Note

      Securely assemble the relay block cover in order to prevent the wire harness from getting caught.

    3. A00DUWGE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide and claw of the relay block.

    4. Install the 3 bolts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }
    5. Connect the 2 wire harness clamps.

    6. A00DPKI

      Connect the front speed sensor connector.

    7. A00DPNV

      for LHD:

      Connect the wireless door lock buzzer connector.

  3. CONNECT WIRE HARNESS


    1. A00DSKZ

      Attach the 2 clamps to connect the wire harness, and then install the 2 nuts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }
    2. Connect the 3 wire harness connectors to the engine room No. 1 relay block.

  4. INSTALL NO. 1 RELAY BLOCK COVER

  5. INSTALL FRONT FENDER LINER LH


    1. A003E2G

      Attach the 8 clips to install the front fender liner LH.

    2. Attach 5 new grommets.

    3. A003CAP

      Install the 6 screws.

    4. A003B86

      Install the pin hold clip.

  6. INSTALL ECM


    1. Install the ECM Click here.