ENGINE COOLANT TEMPERATURE SENSOR INSPECTION


  1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR


    1. Measure the resistance according to the value(s) in the table below.

      A005UKIE01
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
      1 - 2 80°C (176°F) 0.310 to 0.326 kΩ

      If the result is not as specified, replace the sensor.

      Note

      When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.