CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A005RNJ

      Remove the 2 nuts and engine cover.

  2. REMOVE AIR CLEANER CAP


    1. A005VS4

      Disconnect the mass air flow meter connector and wire harness.

    2. Disconnect the purge VSV.

    3. A005VYI

      Disconnect the No. 2 ventilation hose from the cylinder head cover.

    4. Disconnect the No. 2 fuel vapor feed hose from the air cleaner hose.

    5. Squeeze the tabs of the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.

    6. A005R8E

      Unfasten the 3 hook clamps, and then remove the air cleaner cap and hose.

  3. REMOVE CAMSHAFT POSITION SENSOR

    A005VVM

    1. Disconnect the sensor connector.

    2. Remove the bolt and sensor.