| Starter assembly | Standard current | Battery positive terminal - Terminal 30 | 90 A or less at 11.5 V |
| Starter magnetic switch assembly | Standard resistance | Terminal 50 - Terminal C | Below 1 Ω |
| Terminal 50 - Body ground | Below 2 Ω | ||
| Starter armature assembly | Standard resistance | Segment - Segment | Below 1 Ω |
| Commutator - Armature coil core | 10 kΩ or higher | ||
| Standard runout | 0.02 mm (0.000787 in.) | ||
| Maximum runout | 0.05 mm (0.00197 in.) | ||
| Standard diameter | 29.0 mm (1.14 in.) | ||
| Minimum diameter | 28.0 mm (1.10 in.) | ||
| Standard undercut depth | 0.7 mm (0.0276 in.) | ||
| Minimum undercut depth | 0.2 mm (0.00787 in.) | ||
| Starter brush holder assembly | Standard length | 14.4 mm (0.567 in.) | |
| Minimum length | 9.0 mm (0.354 in.) | ||
| Standard resistance | A - B | 10 kΩ or higher | |
| A - C | 10 kΩ or higher | ||
| A - D | Below 1 Ω | ||
| B - C | Below 1 Ω | ||
| B - D | 10 kΩ or higher | ||
| C - D | 10 kΩ or higher | ||
| Engine switch | Standard resistance | 7 (SS1) - 5 (GND) Not pushed |
10kΩ or higher |
| 2 (SS2) - 5 (GND) Not pushed |
10kΩ or higher | ||
| 7 (SS1) - 5 (GND) Pushed |
15 Ω | ||
| 2 (SS2) - 5 (GND) Pushed |
15 Ω | ||
| Starter relay | Standard resistance | Battery voltage not applied to terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 | Below 1 Ω | ||