REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE


    1. Remove the engine assembly with transaxle Click here.

  2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY


    1. Remove the automatic transaxle assembly Click here.

  3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A00OILJE01

      Using SST, hold the crankshaft.

      SST
      09330-00021
      09213-58014   ( 91551-80840 )
    2. A00OIVR

      Remove the 8 bolts, rear spacer, drive plate and front spacer.

  4. REMOVE ENGINE REAR OIL SEAL


    1. A00OLZ2E02
      Text in Illustration
      *1 Cut position
      *2 Protective tape

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver with its tip wrapped with tape, pry out the oil seal.

      Note


      • Do not damage the surface of the oil seal press fit hole or the crankshaft.

      • After removing the oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.