CYLINDER BLOCK REPLACEMENT


  1. REPLACE RING PIN

    Note

    It is not necessary to remove a ring pin unless it is being replaced.

    A005RRBE04

    1. Remove the 12 ring pins.

    2. Using a plastic-faced hammer, install 12 new ring pins.

      Standard Ring Pin
      Item Height Width Protrusion
      Pin A 12.0 mm (0.472 in.) 14.0 mm (0.551 in.) 5.0 to 7.0 mm (0.197 to 0.276 in.)
      Pin B 12.0 mm (0.472 in.) 13.0 mm (0.512 in.) 4.0 to 7.0 mm (0.157 to 0.276 in.)

  2. REPLACE STRAIGHT PIN

    Note

    It is not necessary to remove a straight pin unless it is being replaced.

    A005RJBE03

    1. Using a plastic-faced hammer, install 8 new straight pins.

      Standard Straight Pin
      Item Height Width Protrusion
      Pin A 18.0 mm (0.709 in.) 8.0 mm (0.315 in.) 7.0 to 9.0 mm (0.276 to 0.354 in.)
      Pin B 15.0 mm (0.591 in.) 8.0 mm (0.315 in.) 6.5 to 8.5 mm (0.256 to 0.335 in.)
      Pin C 22.0 mm (0.866 in.) 10.0 mm (0.394 in.) 11.0 to 13.0 mm (0.433 to 0.512 in.)
      Pin D 14.0 mm (0.551 in.) 6.0 mm (0.236 in.) 4.0 to 6.0 mm (0.157 to 0.236 in.)