CYLINDER HEAD DISASSEMBLY


  1. REMOVE VALVE LIFTER


    1. A005R7KE01

      Remove the 16 valve lifters from the cylinder head.

      Tech Tips

      Arrange the valve lifters in the correct order.

  2. REMOVE INTAKE VALVE


    1. A005UCIE03

      Place the cylinder head on wooden blocks.

    2. Using SST, compress the compression springs and remove the 16 retainer locks.

      SST
      09202-70020   ( 09202-00010 )
    3. A005VEI

      Remove the retainers, compression springs and intake valves.

      Tech Tips

      Arrange the removed parts in the correct order.

  3. REMOVE EXHAUST VALVE


    1. A005TH7E02

      Place the cylinder head on wooden blocks.

    2. Using SST, compress the compression springs and remove the 16 retainer locks.

      SST
      09202-70020   ( 09202-00010 )
    3. A005ROW

      Remove the retainers, compression springs and exhaust valves.

      Tech Tips

      Arrange the removed parts in the correct order.

  4. REMOVE VALVE STEM OIL SEAL


    1. A005RXOE01

      Using needle-nose pliers, remove the 16 oil seals.

  5. REMOVE VALVE SPRING SEAT


    1. A005TH6E01

      Using compressed air and a magnet hand, remove the spring seat by blowing air.

      Tech Tips

      Arrange the valves, compression springs, spring seats and spring retainers in the correct order.

  6. REMOVE NO. 1 STRAIGHT HEAD SCREW PLUG


    1. A005RK8

      Using a 14 mm straight hexagon wrench, remove the 2 screw plugs and 2 gaskets.

      Note

      If water leaks from the straight screw plug or the plug is corroded, replace it.

  7. REMOVE STUD BOLT

    Note

    If a stud bolt is deformed or its threads are damaged, replace it.