REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY


    1. Remove the automatic transaxle Click here.

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A00DPUYE03

      Using SST, hold the crankshaft.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
    2. A00DTZKE04

      Remove the 8 bolts, rear drive plate spacer, drive plate and front drive plate spacer.

  3. REMOVE ENGINE REAR OIL SEAL


    1. A00DQK7E01
      Text in Illustration
      *1 Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.