FRONT CRANKSHAFT OIL SEAL INSTALLATION


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new oil seal.

    2. A00DTBGE01

      Using SST and a hammer, tap in the oil seal until its surface is flush with the oil seal retainer edge.

      SST
      09223-22010

      Note


      • Keep the lip free from foreign matter.

      • Do not tap on the oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY

    A00DT93E03

    1. Using SST, fix the crankshaft pulley in place and tighten the bolt.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
      Torque:
      180 N*m  { 1835 kgf*cm, 133 ft.*lbf }

  3. INSTALL FAN & GENERATOR V BELT


    1. Install the belt Click here.

  4. INSPECT FOR OIL LEAK


    1. Start the engine. Make sure that there are no oil leaks from the area that was worked on.