IGNITION COIL AND SPARK PLUG INSTALLATION


  1. INSTALL SPARK PLUG


    1. A005VJW

      Using a 14 mm spark plug wrench and 100 mm extension bar, install the 4 spark plugs.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  2. INSTALL IGNITION COIL ASSEMBLY


    1. A005U3JE01
      Text in Illustration
      *1 Cylinder Head Cover
      *2 Spark Plug Tube
      *3 Plug Cap

      Install the 4 ignition coils with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      When installing the ignition coil, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.

    2. A005TOB

      Connect the 4 ignition coil connectors.

  3. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A005VFG

      Attach the 4 clips to install the cover.

      Note


      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.

  4. INSTALL COWL TOP VENTILATOR LOUVER


    1. Install the cowl top ventilator louver Click here.