CAMSHAFT OIL CONTROL VALVE INSTALLATION


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)


    1. A005UKFE04
      Text in Illustration
      *1 New O-Ring

      Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

    2. A005R6FE01

      Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    3. Connect the oil control valve connector.

  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)


    1. A005UKFE04
      Text in Illustration
      *1 New O-Ring

      Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

    2. A005RX5E01

      Install the oil control valve and wire harness bracket with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    3. Connect the oil control valve connector.

  3. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A005VFG

      Attach the 4 clips to install the cover.

      Note


      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.