CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A005VFG

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)


    1. A005R6FE01

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)


    1. A005RX5E01

      Disconnect the oil control valve connector.

    2. Remove the bolt, wire harness bracket and oil control valve.

    3. Remove the O-ring from the oil control valve.