CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A005W8Q

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  2. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A005VK3

      Disconnect the sensor connector.

    2. Remove the bolt and sensor.

  3. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A005SZX

      Disconnect the sensor connector.

    2. Remove the bolt and sensor.