ЗАДАЮЩАЯ ШЕСТЕРНЯ ПОВТОРНАЯ СБОРКА


  1. INSTALL COUNTER GEAR FRONT BEARING


    1. A01J4VXE01

      Using SST and a press, press in a new front bearing to the counter gear.

      SST
      09515-10010

      Note

      Install the bearing so that the snap ring groove of the bearing faces forward.

  2. INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING


    1. Select a snap ring so that the clearance between the counter gear and snap ring is within the specification.

      Standard clearance
      0.10 mm (0.00393 in.) or less
      Snap Ring Thickness
      Thickness
      2.05 to 2.10 mm (0.0807 to 0.0827 in.)
      2.10 to 2.15 mm (0.0827 to 0.0846 in.)
      2.15 to 2.20 mm (0.0846 to 0.0866 in.)
      2.20 to 2.25 mm (0.0866 to 0.0886 in.)
      2.25 to 2.30 mm (0.0886 to 0.0906 in.)
      2.30 to 2.35 mm (0.0906 to 0.0925 in.)
    2. A01J7DWE02

      Using a snap ring expander, install the snap ring.