МАСЛЯНЫЙ НАСОС РАЗБОРКА


  1. REMOVE FRONT OIL PUMP BODY O-RING

    A01J2Y9E01

    1. Remove the O-ring from the oil pump assembly.

  2. FIX OIL PUMP ASSEMBLY

    A01J6GUE07

    1. Place the oil pump body on the torque converter clutch.

  3. REMOVE CLUTCH DRUM OIL SEAL RING

    A01J6UPE05

    1. Remove the 3 oil seal rings.

  4. REMOVE STATOR SHAFT ASSEMBLY

    A01J4DME01

    1. Remove the 14 bolts, and then remove the stator shaft from the oil pump body.

  5. REMOVE FRONT OIL PUMP BODY O-RING

    A01J6ZPE01

    1. Remove the O-ring from the oil pump body.

    2. Remove the oil pump body from the torque converter clutch.

  6. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

    A01J5HEE01

    1. Using a dial indicator, measure the inside diameter of the oil pump body bushing.

      Maximum inside diameter
      38.188 mm (1.504 in.)

      • If the inside diameter is greater than the maximum, replace the oil pump body.

  7. INSPECT STATOR SHAFT ASSEMBLY

    A01J7K3E01

    1. Using a dial indicator, measure the inside diameter of the stator shaft bushing.

      Maximum inside diameter
      Front side
      21.577 mm (0.850 in.)
      Rear side
      32.08 mm (1.263 in.)

      • If the inside diameter is greater than the maximum, replace the stator shaft.

  8. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY

  9. REMOVE FRONT OIL PUMP DRIVE GEAR

    A01J3UWE01

  10. REMOVE FRONT OIL PUMP DRIVEN GEAR

    A01J6ZWE01

  11. REMOVE FRONT OIL PUMP OIL SEAL

    A01J54AE01

    1. Using a screwdriver, remove the oil seal.

      Note

      Be careful not to damage the bushing and oil pump body.