ЗАДНИЙ САЛЬНИК УДЛИНИТЕЛЯ КАРТЕРА ТРАНСМИССИИ ЗАМЕНА


  1. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. Remove the drain plug and gasket, and drain ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      20 N*m  { 205 kgf*cm, 15 ft.*lbf }

  2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


    1. Remove the propeller with center bearing shaft Click here.

  3. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL

    A01J4FBE01

    1. Using SST, remove the oil seal.

  4. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL

    A01J4PFE01

    1. Coat the lip of a new oil seal with MP grease.

    2. Using SST and a hammer, tap in the oil seal.

      Standard oil seal depth
      0 +-0.5 mm (0 +-0.020 in.)

      Note

      Be careful not to damage the lip of the oil seal.

  5. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


    1. Install the propeller with center bearing shaft Click here.

  6. ADD AUTOMATIC TRANSMISSION FLUID

    Fluid type
    Toyota Genuine ATF Type T-IV

  7. CHECK AUTOMATIC TRANSMISSION FLUID


    1. Inspect the automatic transmission fluid Click here.