СТАРТЕР РАЗБОРКА


  1. REMOVE STARTER YOKE ASSEMBLY


    1. A01J48D

      Remove the nut and disconnect the lead wire from terminal C.

    2. Remove the 2 bolts.

    3. Pull out the starter yoke and starter commutator end frame together with the starter armature.

    4. Remove the O-ring from the starter yoke.

  2. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. A01J68Y

      Remove the 2 screws and magnet starter switch.

    2. Remove the idle gear, retainer, clutch roller, return spring and starter clutch from the starter drive housing.

      A01J5ZRE01
    3. A01J5L0E02

      Using a magnet hand, remove the steel ball from the starter clutch hole.

  3. REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. A01J61I

      Remove the 2 screws and commutator end frame from the starter yoke.

      Note

      While holding down the lead wire, remove the starter commutator end frame.

    2. Remove the dust protector from the commutator end frame.

    3. Remove the O-ring from the starter yoke.

    4. A01J7EB

      Disconnect the 4 brushes from the starter brush holder.


      1. Using a screwdriver, hold back the spring.

      2. Disconnect the brush from the brush holder.

    5. Remove the brush holder.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. Remove the starter armature from the starter yoke.