СТАРТЕР СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT FENDER SEAL


    1. Remove the 5 clips and seal.

  3. REMOVE STARTER ASSEMBLY


    1. A01J6JX

      Remove the bolt and ground wire.

    2. Disconnect the terminal cap.

    3. Remove the nut and disconnect the starter wire.

    4. Disconnect the starter connector.

    5. A01J3S5

      Remove the 2 bolts and starter.