РАДИАТОР РАЗБОРКА


  1. REMOVE RADIATOR BRACKET SUB-ASSEMBLY


    1. A01J7M4E01

      Remove the 4 bolts and 2 brackets.

  2. REMOVE RADIATOR DRAIN COCK PLUG


    1. Remove the drain cock plug.

    2. Remove the O-ring.

  3. ASSEMBLE SST


    1. A01J6ASE01

      Install the claw to part A of the overhaul handle as shown in the illustration.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

    2. While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

      Dimension B
      0.2 to 0.3 mm (0.008 to 0.012 in.)

      Note

      If this adjustment is not performed, the claw will be damaged.

  4. UNCAULK LOCK PLATE


    1. A01J7ATE01

      Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

  5. REMOVE RADIATOR TANK UPPER AND TANK LOWER


    1. A01J3S0E01

      Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the tank.

    2. Remove the O-ring.

      Note

      Do not tap automatic transmission oil cooler pipe.

  6. REMOVE OIL COOLER ASSEMBLY (for Automatic Transmission)


    1. A01J56ME01

      Remove the 2 cooler pipes.

    2. Remove the 2 nuts, 2 lock plates and oil cooler.

    3. Remove the 2 O-rings from the oil cooler.