ВЕНТИЛЯТОР СНЯТИЕ


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. Remove the 4 bolts and under cover.

  2. DRAIN ENGINE COOLANT


    1. Remove the radiator cap.

    2. Loosen the cylinder block drain cock plug and radiator drain cock plug, and then drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

      A01J385E01

  3. DISCONNECT RADIATOR HOSE INLET

  4. DISCONNECT RADIATOR HOSE OUTLET

  5. REMOVE FAN SHROUD

    A01J582

    1. Disconnect the radiator reservoir hose from the radiator tank upper.

    2. Loosen the 4 nuts holding the fluid coupling fan.

    3. Remove the drive belt Click here.

    4. Remove the 2 bolts holding the fan shroud.

    5. Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

      Note

      Be careful not to damage the radiator core.

    6. Remove the fan pulley from the water pump.

  6. REMOVE FAN


    1. A01J5KF

      Remove the 4 nuts and fan from the fluid coupling.