ТОПЛИВНЫЙ ФИЛЬТР УСТАНОВКА


  1. INSTALL FUEL FILTER


    1. A01J37GE01

      Install the fuel filter with the 3 nuts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. Install the charcoal canister to the bracket.

  2. CONNECT FUEL MAIN TUBE

    Note

    Before installing the fuel main tube's connector to the fuel filter's upper pipe, check the connector for damage and foreign matter.


    1. Connect the connector to the upper pipe. Push the 2 parts together firmly until a "click" sound is heard. Then attach the lock claws to the connector by pushing down on the connector cover.

    2. Check that the connector and upper pipe are securely connected by trying to pull them apart.

    3. Install the fuel tube grommet.

  3. CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY


    1. Connect the connector to the lower pipe. Push the two parts together firmly until a "click" sound is heard.

    2. Check that the connector and lower pipe are securely connected by trying to pull them apart.

    3. Connect the pipe to the clamp.

  4. CONNECT CANISTER

    A01J6PYE02

    1. Install the canister to the bracket.

    2. A01J3T9E01

      Connect the air inlet line hose to the canister.

    3. Connect the purge line hoses to the canister.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  7. CHECK FOR FUEL LEAKS


    1. A01J7EJE01

      Connect the intelligent tester to the DLC3.


      1. Turn the ignition switch ON.

        Note

        Do not start the engine.

      2. Push the intelligent tester main switch ON.

      3. To perform the Active Test, enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.

    2. Check the fuel pump operation.


      1. Check for pressure in the fuel inlet tube from the fuel line. Check that the sound of fuel flowing in the fuel tank can be heard.

        If there is no sound, check the integration relay, fuel pump, ECM and wiring connector.

    3. Check for fuel leaks.


      1. Check that there are no fuel leaks after performing maintenance anywhere on the system.

        If there are fuel leaks, repair or replace the leaking parts.