ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE DRIVE BELT

    A01J4C6E01

    1. Ослабьте натяжение ремня, повернув натяжитель ремня против часовой стрелки, и снимите поликлиновой ремень с натяжителя.

  3. REMOVE IDLER PULLEY (w/o Air Conditioning System)


    1. A01J4ZE

      Remove the 3 bolts and idler pulley.

  4. REMOVE GENERATOR ASSEMBLY (w/ Air Conditioning System)

    A01J5AE

    1. Disconnect the terminal cap.

    2. Remove the 2 bolts, nut and generator wire.

    3. Disconnect the generator connector.

    4. Remove the 2 bolts and generator.

  5. DISCONNECT COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)


    1. A01J5Y5

      Remove the 2 bolts and disconnect the suction hose from the engine.

    2. A01J6LE

      Disconnect the cooler compressor connector.

    3. Remove the 4 bolts and disconnect the compressor from the engine.

    4. Support the cooler compressor securely.

  6. REMOVE CRANKSHAFT POSITION SENSOR


    1. A01J3WHE01

      Disconnect the sensor connector.

    2. Remove the bolt and sensor.