КОРПУС ДРОССЕЛЬНОЙ ЗАСЛОНКИ СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. DRAIN ENGINE COOLANT


    1. Remove the radiator cap.

    2. Loosen the 2 cylinder block drain cock plugs and radiator drain cock plug, and then drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

      A01J5DWE01

  3. REMOVE V-BANK COVER


    1. A01J56U

      Remove the 2 nuts and V-bank cover.

  4. REMOVE NO. 2 VENTILATION HOSE

    A01J3PA

  5. REMOVE AIR CLEANER ASSEMBLY


    1. A01J6D5

      Disconnect the vacuum hose.

    2. Disconnect the MAF meter connector.

    3. Remove the 2 wire harness clamps.

    4. A01J4E3

      Loosen the 2 hose clamps.

    5. Remove the 2 bolts and air cleaner.

  6. REMOVE THROTTLE BODY


    1. A01J7IS

      Disconnect the throttle position sensor and control motor connector.

    2. Remove the 4 bolts and throttle body.

    3. Remove the gasket from the intake air surge tank.