ТЯГА ПЕДАЛИ АКСЕЛЕРАТОРА УСТАНОВКА


  1. INSTALL ACCELERATOR PEDAL ROD


    1. A01J408E01

      Install the accelerator pedal rod with the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal rod.

      If applied, the accelerator pedal rod must be replaced.

    2. Connect the accelerator pedal position sensor connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  3. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.