BACK DOOR OUTSIDE GARNISH INSTALLATION


  1. INSTALL NO. 3 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 3 back door name plate (if reusing the No. 3 back door name plate).


      1. Using a heat light, heat the No. 3 back door name plate.

      2. Remove the double-sided tape from the No. 3 back door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 3 back door name plate.

    3. Install the No. 3 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 3 back door name plate.

      2. Remove the release paper from the No. 3 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 back door name plate as shown in the illustration.

        A003ZYRE01
        Text in Illustration
        *1 Location Pin - -

  2. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 2 back door name plate (if reusing the No. 2 back door name plate).


      1. Using a heat light, heat the No. 2 back door name plate.

      2. Remove the double-sided tape from the No. 2 back door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 2 back door name plate.

    3. Install the No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        A004456E01
        Text in Illustration
        *1 Location Pin - -

  3. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM


    1. A00422D

      Engage the pin and 3 claws to install the luggage compartment door emblem.

      Note

      Be careful not to damage the vehicle body.

  4. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY


    1. Install the back door opener switch assembly.

  5. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. A0042EOE01
      Text in Illustration
      *1 String
      *2 Double-sided Tape
      *3 Center line

      Wind double-sided tape around a string as shown in the illustration.

      Tech Tips

      The string is used to prevent the edge of the No. 2 back window lower moulding from being tucked under the back door outside garnish sub-assembly during installation.

      Standard Dimension
      a 1600.0 mm (62.992 in.)
      b 50.0 to 75.0 mm (1.969 to 2.953 in.)
      c 30.0 mm (1.181 in.)
    2. A0041RKE01
      Text in Illustration
      *1 String
      *2 Double-sided Tape
      *3 No. 2 back window lower moulding
      *4 Tape

      Lift the ends of the No. 2 back window molding lower, and attach each end to the back door glass with tape.

      Standard Dimension
      a 40.0 mm (1.575 in.)

    3. Make a loop in the center of the string, and attach it to the back of the No. 2 back window lower moulding with the double-sided tape on the string.

    4. Attach the loop and ends of the string to the back door glass with tape as shown in the illustration.

    5. Install the 4 new gaskets to the back door outside garnish sub-assembly.

    6. Install 11 new clips (back door outside garnish clip) to the back door outside garnish sub-assembly.

    7. A0043NN

      Engage the 11 clips to install the back door outside garnish sub-assembly.

      Tech Tips

      Make sure that the string does not get pulled out from the back of the No. 2 back window molding lower.

    8. A0040FU

      Install the 4 nuts.

    9. Apply soapy water to the No. 2 back window molding lower.

    10. A0040WSE01

      Remove the string by slowly pulling out toward each end from the center toward the sides of the vehicle as shown in the illustration.

      Note

      Do not damage the No. 2 back window lower moulding.

    11. Check that the No. 2 back window molding lower is not pinched between the back door and the back door outside garnish sub-assembly.

    12. Remove the tape.

  6. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. A0043I1

      Engage the 11 clips and 2 claws to install the back door panel trim assembly.